Graphene Pro Shield - 10H Hardness | Up to 3 Years Protection

Aautofinch Graphene Coating – 10H Hardness | Up to 3 Years Protection

Give your vehicle’s paintwork advanced protection and a high-gloss finish with Aautofinch Graphene Coating.Formulated with graphene technology, this premium automotive coating creates a durable protective layer over the paint surface while enhancing gloss, smoothness and water repellency. With 10H hardness, the coating helps improve resistance against everyday surface wear and environmental contaminants. Its heat-resistant and UV-resistant properties help protect the paintwork during exposure to sunlight and high temperatures.

Key Features & Benefits

• 10H Hardness : Creates a hard protective layer to help resist everyday surface wear.
  
• Up to 3 Years Protection : Provides long-lasting paint protection with proper application and maintenance.
  
• Heat Resistant : Helps maintain coating performance under high-temperature conditions.
  
• UV Resistant : Helps protect the paint surface from UV exposure and fading.
  
• Hydrophobic Protection : Repels water and helps reduce the adhesion of dirt and contaminants.
  
• Enhanced Gloss : Gives your vehicle a deep, glossy and premium appearance.
  
• Smooth Surface : Leaves the paintwork slick and easier to maintain.
  
• Long-Lasting Protection : Provides durable surface protection when properly applied and maintained.
  
• Paint Protection : Helps shield the vehicle’s clear coat from environmental contaminants and everyday exposure.

1.Wash Thoroughly – Clean the vehicle using a suitable car shampoo to remove dirt, dust and road contaminants. Rinse and dry completely.
2.Paint Preparation – Remove embedded contaminants using a clay bar or suitable decontamination product. For best results, polish the paintwork to remove oxidation, light scratches and imperfections.
3.Surface Preparation – Wipe the entire surface with an appropriate panel wipe or IPA-based surface cleaner to remove polish residue, oils and grease. Ensure the surface is completely clean and dry.
4.Apply the Coating – Work in a cool, dry and dust-free area. Apply a few drops of Aautofinch Graphene Coating to the supplied applicator and spread evenly over a small section using overlapping horizontal and vertical strokes.
5.Allow to Flash – Allow the coating to flash for approximately 1–3 minutes, depending on temperature and humidity. The surface should develop a slight rainbow/oily appearance before leveling.
6.Level & Buff – Using a clean, soft microfiber cloth, gently level the coating. Follow immediately with a second clean microfiber cloth to remove any remaining residue and achieve an even, streak-free finish.
7.Curing – Allow the coating to cure undisturbed. Keep the vehicle away from water, rain and moisture for at least 24 hours. Avoid washing or exposing the vehicle to harsh chemicals during the initial curing period.